Autel AutoLink AL319 Review

We’ve written this Autel AutoLink AL319 review because we believe this tool will save you countless hours!

The automotive industry is constantly changing. This includes the technology that is being used in today’s vehicles. With the introduction of OBD II, there have been many changes to the way vehicles operate. Almost every system on a vehicle is computer controlled. Some systems operate from their own module, or share modules with other systems. In order for the computer to monitor these systems it uses different sensors to obtain the data that is needed. This makes it very difficult to diagnose an issue with a vehicle since a lot of these sensors and systems work together. Without the correct tools, the average person will not have a clue where to start when in reference to diagnosing a problem with their vehicle. A check engine light concern is a perfect example of this. Many think that a code from a check engine light is the only answer needed to correct an issue with their vehicle. This is not always the case since a code simply points in the general direction of what is causing the light to be on. With the proper scan tool the guesswork of where to start can be eliminated. The Autel AutoLink AL319  is a perfect example of an affordable scan tool that can aid in the diagnostic procedure. This scan tool not only gives you access to diagnostic troubles codes, but also has other options that help aid in any check engine light related repair.

Autel Professional OBD2 Scanner AL319 Code Reader,...

• 【TURN OFF CEL】 This AL319 car diagnostic tool supports Reading DTCs, displaying Live Data, Freeze Frame & I/M Readiness etc to figure out the root cause of the Check Engine Light (CEL) and turning...
• 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota, Nissan, Honda, Ford, etc.), this OBD II...
• 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of...

$35.99

Buy on Amazon

Know The Status Of Vehicle Readiness Monitors

The vehicles computer uses monitors to inspect most electronically controlled components. These different monitors will run self-tests to let the computer know if there is an issue, and where it is located. If there is an issue with a system, the computer will set a code which will then turn on the check engine light. Whenever a check engine light, or computer is reset these monitors will stay “not ready” until the required tests are completed. After repairing a vehicle it is important to verify the repair. When correcting a check engine light, knowing if these monitors are complete is very important. In most cases, if the monitor completes, and changes to “ready” then the repair can be verified as completed. The Autel AutoLink AL319 makes knowing if the monitors are completed very easy. The color display, audible tones, and one touch access to the vehicle readiness monitors can surely aid in any check engine light repair procedure.

This OBD2 scanner will help you pass emissions tests

The other benefit to knowing the status of the vehicle readiness monitors is for state inspection. Many states require emissions inspections. Having these systems ready is part of the emission inspection. If these systems are not ready then the vehicle will most likely not pass the inspection requirements. This scan tool is essential when ensuring that the required monitors are set, and ready before inspection.

View The Freeze Frame Data

When diagnosing a check engine light concern it is very important to duplicate what caused the check engine light to come on. How fast the vehicle was moving, engine temperature, and fuel trims are only some of the clues that can lead to the diagnosis of a check engine light concern. This information is stored by the computer at the time of fault. With this information the situation that caused the check engine light to illuminate can be duplicated. This will allow the individual diagnosing the concern to better locate the root cause of the fault that is causing a stored code. The Autel AutoLink AL319 allows the user to access this information. With this access and a little bit of knowledge you will be able to narrow into the problem with laser precision! 

Reset Monitors And Clear Trouble Codes

When dealing with a check engine light concern the repair cannot be completed until the trouble code is cleared. There is no point in repairing a check engine light concern if the light will continue to be on after the repair. This will also reset the readiness monitors. This will aid with the verification of repair. When resetting the monitors the computer system is clear of any faults. This will allow the individual to know if the problem was corrected by performing a road test, and ensuring that the monitor specific to the issue is reset. Until this is performed the repair cannot be verified. The Autel AutoLink AL319 allows for quick access to both clear diagnostic trouble codes which will reset the monitors, and viewing of the monitors to ensure that they reset with no issues. The colorful display will give you up todate information about the monitors that is easy to read on the monitor status screen. This will surely help with any road test after a repair is performed.

Specifications

The Autel AutoLink AL319 is an affordable scan tool with the some of the same perks as the larger more expensive scan tools. This lightweight scan tool can surely aid with any check engine light repair.

• OBD II & CAN compatible
• Colorful LED screen
• Audible alerts
• 1 pound of weight
• 63 x 17.7 x 92.5 inches in length
• Readiness monitor status
• Freeze frame data accessible

PROS:

We enjoyed the easy-to-read color screen, audible tones, and quick access to readiness monitors delightful. We’ve got a few mechanic buddies who use this scan tool in their shop for the quick access to diagnostic trouble codes, and readiness monitors. The quick access features are easier to use then some larger, more involved scan tools that can be found in repair facilities. The features are limited compared to the larger, more expensive scan tools, but for basic diagnostics the ease of access is a sure winner.

CONS:

We’ve heard of complaints with this OBD2 not updating. We never experienced this issue with our scanner, so we suspect that there are some defective models out there. If you do experience any issues with the Autel AutoLink AL319, just make sure you purchase it from Amazon and they will replace it or refund your purchase

Final Thoughts

The Autel AutoLink AL319 is an awesome and affordable scan tool for the average user. The speed and simplicity of this OBD2 tool will lessen your headache when that nasty Check Engine Light turns on. Need to know if your vehicle can pass an emissions check? With one click of the Autolink AL319 you will know. Whether you are enjoy tinkering with your Honda Civic, make a living fixing cars, or work with emissions, you’ll find value with this OBD2 scanner.

If you need a basic OBD2 scanner, this scan tool is HIGHLY RECOMMENDED and ScannerAnswers approved

-Mike

The post Autel AutoLink AL319 Review appeared first on ScannerAnswers.

We’ll be frank. The Autel MaxiScan MS300 is one of the best corded OBD2 scanners for the price! When we decided to write the Autel MaxiScan MS300 Review, we had no idea just how much vehicle information this scanner would show you at the press of a button!

Autel MaxiScan MS300 Review

Autel MS300 OBD2 Scanner Code Reader, Turn Off...

• 【For Car DIYers And Beginners】This plug-and-play Autel scanner MS300 can pay for itself in the first use. It communicates with vehicles through standard 16-PIN OBD2 cable and it’s powered by...
• 【Read Codes & Clear Codes In Seconds】Getting diagnostic codes(DTCs) should be the start of all repairs if you don't want to be ripped off. You can use MS300 to read the codes in seconds and look...
• 【Turn Off Check Engine Light】The check engine light is always annoying you, most of the time because of a little thing, isn't it? Maybe it's just a gas cap that's not tightened but you paid...

$19.98

Buy on Amazon

You cannot go wrong with an Autel branded OBDII scanner!

Being able to communicate with a vehicles computer is very important with the current technology that is being used by manufacturers. When a check engine light is illuminated on the dash there are many different components that could cause that light to be on. The only way to know what is going on with the vehicle is by retrieving the code stored in the computer. This can only be done using a diagnostic scan tool that is compatible with the technology equipped on the vehicle. There are many different scan tools on the market to choose from at different price points. If the consumer is simply looking to find a scan tool that can pull trouble codes, and give a general direction of where to go in the diagnosis procedure then there is no reason to invest in a large scan tool with multiple features.

The Autel MaxiScan MS300 would be a perfect scan tool for anyone that wants to add some basic diagnostic ability to their toolbox. This scan tool is able to communicate with most OBD II, and CAN compliant vehicles. It is small, lightweight, and inexpensive compared to some other scan tools on the market.

I found the lowest price on the Autel ms300 at Amazon here

Easy Use

Some scan tools can be very complex, and difficult to use. These scan tools normally give the user a ton of information about what is going on with the vehicle during a failure. This information in some cases is needed in order to properly diagnose a problem that is occurring. But here’s the thing, we’re lazy too, and like to know what’s going on with our cars with the push of a button! The Maxiscan MS300 makes life easy for us lazy folks!

In some cases a large amount of information is not needed to either diagnose, or have an idea of what is happening when a trouble light is illuminated on the dashboard. All this information can easily confuse someone that is not properly trained on how to read the information. The Autel MaxiScan MS300 is an easy to use scan tool that will give the consumer just enough information to know a direction of where to go with diagnosis. The two button design makes this tool very easy to navigate when trying to read, or clear diagnostic trouble codes. This quick access gives you both piece of mind, and the information needed to proceed on what course of action is needed to fix your car (or truck).

Code Descriptions

Access to diagnostic trouble codes is only part of the information needed to diagnose a vehicle. Knowing what the code definition is can be more important than having the code itself. There are many different codes that can be stored in a computer, and all of them will have different descriptions. The Autel MaxiScan MS300 gives you different ways to access what the description of each code stored is. The scan tool will retrieve the code stored. On the same screen that will give the consumer the code will also give the consumer the description. The description of the code can also be found on CD catalog that is supplied with the scan tool. You can also find the Autel MaxiScan MS300 user manual here: http://www.auteltech.com/u/cms/www/201209/07033345uqvu.pdf

The code definitions start on Page 20 of the manual.

Access To Vehicle Identification Number

No more squishing your head between the dashboard and glass trying to read your VIN!

Anyone that has attempted to buy parts for their vehicle will know the importance of having all of the information for that vehicle available. In some cases the full vehicle identification number will be required to locate the correct parts. The vehicle identification number can be found in multiple locations. Some manufacturers place it on a sticker in the door frame, and on a plate that can be seen through the windshield on the dash. Unfortunately, sometimes the identification number can not be easily read at these locations. The Autel MaxiScan 300 makes finding the vehicle identification number less complicated. This scan tool can read the vehicle identification number for most vehicles 2002, and newer. This easy access can make it easier to have the information needed when purchasing parts.

Communication

Technology is constantly changing. The automotive industry is no different. The two primary systems used for communication in a vehicle are OBD II, and CAN. Without a scan tool that is capable of access to these systems there will be no communication with the vehicles computer. The Autel MaxiScan MS300 allows communication with most U.S., European, and Asian vehicles equipped with these systems.

Specifications

When looking for a small, lightweight, easy to use, and read scan tool the Autel MaxiScan 300 may be the perfect fit. This small scan tool will fit in anyone’s toolbox, and makes retrieving diagnostic codes easy.

• 11.4 Ounces in weight
• 6.3 x 2 x 9.1 inches in size
• Backlit display
• Code, and description present on screen
• Lithium ion batteries are required
• Model number is MS300

Final Thoughts

There are many different scan tools to choose from on the market. Not every scan tool is created equal. Depending on the scan tool, and features each scan tool can perform different jobs depending on the need. That’s why we’ve created this site and written the Autel MaxiScan MS300 review to help you find out if this is the best obd2 scanner for your wallet!

Grab yourself the Autel MS300 here

One nuance that you might not enjoy is that this obd2 scanner only retrieves codes. This means that it is lacking in features of higher-end models, like real time monitoring, no updates, and no printing capability. For most  mechanics and tinkerers who are looking for basic information, these features wouldn’t even be used. Real time monitoring information is only needed when actually trying to diagnose an issue with a vehicle that is complicated. This tool is simply perfect for retrieving trouble codes to gain some knowledge as to what is going on with vehicle when the check engine light is illuminated. This OBD2 scanner is a cost effective option for anyone that simply wants to become a little more educated before bringing the vehicle into a repair shop.

When looking for a scan tool that can simply read, and clear diagnostic trouble codes the Autel MS300 would be a good fit. Many friends of ours that purchase this tool find it does exactly what is stated in the description. It reads, and clears diagnostic trouble codes for most vehicle that are equipped with OBD II, and Can. It will give you the code, and description of the code.

Did this Autel MaxiScan MS300 review help you decide on the best OBD2 scanner for you? If not, we’ve review a TON of OBD2 scan tools and want to help you find the perfect fit. Check out the ScannerAnswers guide to finding the best OBD2 scanner or leave us a comment if you have any questions!

The post Autel MaxiScan MS300 – Review appeared first on ScannerAnswers.

Autel DS708 Review

The Autel DS708 Automotive Diagnostic and Analysis System is not an ordinary scanning tool. One look is all it takes to convince you that this OBD-II scanning tool is made for professionals and advanced users, but it is actually easy to use even if you’re a novice user. Yes, the price is a bit high compared to other vehicle scanners. But in the case of the Autel DS708, you ultimately get what you pay for. If you’re looking for an Autel DS708 Automotive Diagnostic and Analysis System Review, then you’re at the right place.

First, let’s make one thing clear: there is an updated version of this product, the MS906. The new device basically looks the same as the DS708 but it has a different interface. The MS906 is also more expensive than the DS708 (by about $$$ at our time of testing the DS708). We will post a separate review for the Autel MS906. But for now, read more on my experience of the Autel DS708…

This automotive scanner works via Wi-Fi, so you can expect fast and smooth communication between the DS708 and the on-board diagnostics port in your vehicle. You don’t need a separate device like a smartphone or tablet, and you don’t need to worry about compatibility either. The Autel DS708 is equipped with a brilliant 7-inch TFT touchscreen, so all you have to do is plug the OE connector to your vehicle to begin searching for the cause of that pesky check engine light.

Autel MaxiCOM MK808K-BT Scanner: 2025 Full...

• 【2025 Flagship Bidirectional Scanner MK808K-BT】In functionality MK808K-BT = MK808BT-PRO, MK808Z-BT, MX900,MK900-BT, better than MK808S/MX808S/MK808Z with wider coverage and more stable &...
• 【3000+ Bidirectional Tests for 150 Car Brands】MK808K-BT is 5X faster than MK808BT, offering 3000+ Active Tests for 150 car brands. It can Instantly command and verify 99% of relays, injectors,...
• 【28+ HOT Services, 99% Coverage】MK808K-BT escaner automotriz professional, Com. Of MK808S, MK808Z MX808S, MX900 MK900, MK900BT, enjoys #1 extensive filed-tested database, 150+ worldwide brands &...

$519.00

Buy on Amazon

Get Extensive Vehicle Coverage with the Autel DS708 Automotive Diagnostic and Analysis System

That’s right. The Autel DS708 offers extensive vehicle coverage for more than 50 vehicle makes and models. It doesn’t matter if you drive an American, European or Asian vehicle. Other vehicle scanners offer limited coverage, and some are designed to work with American cars only. But not the Autel DS708. This baby is designed to easily scan and diagnose the check engine light on any type of vehicle, including diesel cars and trucks. You also get free automatic Wi-Fi updates for a year, but after that you need to pay for specific software updates.

But that’s not the best part. The Autel DS708 is designed to work with all OBD-II protocols, including CAN-BUS. It will also work on pre-1996 OBD-I vehicles. If you work in a shop or own a garage, this vehicle scanner is perfect for you, since there is no need to use a separate scanner or an overly expensive OBD-II scan tool. The kit comes complete with OEM-quality PIN connectors for 1996 and newer vehicles, including the BMW 20 PIN connector and the Mercedes 38 PIN attachment.

It’s good to know that the Autel DS708 is also equipped with dual-processors for quicker diagnostics and lightning-fast boot times. The operating system comes courtesy of Windows CE.

The Autel DS708 is a Feature-Packed OBD-II Vehicle Scanner

If you love electronic gadgets, then you’ll fall head over heels with the Autel DS708 Automotive Diagnostic and Analysis System. Cheap vehicle scanners will salivate over the touchscreen design, which is wrapped in a strong plastic housing with multi-layered rubber protection and ergonomic handles. It feels good in the hand, and the device feels rigid enough for commercial use.

The Autel DS708 can display live CPU data in text, graph or analogue format. Try doing that with an average vehicle scanner. This makes it easier to read the trouble code, analyse the data and make a proper diagnosis. This device can also record and play back live data, making it more convenient to pinpoint sensor troubles and faulty components. If that’s not enough, you can also capture, save and print screenshots for a more thorough diagnosis. If you like working with aftermarket performance parts on your vehicle, this scanner is definitely right for you.

Intelligent memory makes the DS708 is a time-saver

We also love the intelligent memory feature of the Autel DS708. For those who aren’t familiar with OBD-II vehicle scanners, having a memory feature is great because it allows you to quickly and easily diagnose vehicles that were previously scanned by the device. It actually remembers the vehicles that you scanned, so you can load the settings in an instant.

Product Features of the Autel DS708

The Autel DS708 OBD-II automotive diagnostic tool is designed to recreate the functionality of expensive OEM vehicle scanners that technicians use at the dealership. However, OEM scanners are not cheap. In fact, they can cost $2,000 to $5,000. But not the Autel DS708. It is a professional-quality scan tool at a lower price, and it comes standard with features such as:

• Read and clear diagnostic trouble codes on all OBD-II protocols including CAN-BUS for newer cars and trucks.
• Extensive vehicle coverage for more than 50 makes and models, including domestic, European and Asian model vehicles.
• Component activation, including vehicle immobilizers, key coding functionality and component activation testing.
• Live data and ECU programming, with an intelligent memory feature that instantly recognizes vehicles that were already scanned by the device.
• Automatic Wi-Fi updates and data logging.
• USB connection port so you can connect the device to your laptop or PC if you want to update or print vehicle data. You can also print wirelessly over Wi-Fi.
• SD card slot up to 4GB.
• Dual processor technology and genuine Windows CE operating system for smooth and stable performance.
• Comes with built-in overvoltage protection to prevent damage to vehicle CPU.
• 7-inch touchscreen TFT colored display offers vivid graphics and an easy to use interface.
• Solid plastic body with multi-layered rubber protection and textured side grips designed for heavy-duty shop use.
• Multi-language support with one year free update online.

Last thoughts

We love the Autel DS708 Automotive Diagnostic and Analysis System, but we have to admit that this device is geared more towards more experienced users. The price is also quite high, especially for novice gearheads. We think that the updates should be free even after the first year, but if you own a garage then the updates will ultimately pay for themselves in the long run.

We enjoyed testing and writing this Autel DS708 Automotive Diagnostic and Analysis System Review. If you have any questions, be sure to let us know!

–Mike

The post Autel DS708 Automotive Diagnostic and Analysis System Review appeared first on ScannerAnswers.